12
short press to
go back
to the current channel.
“EMG...”
disappears on the display.
Consult the menu
EMG SETTING
on page 14
7 + 8) KEY LOCK
(simultaneous short press)
Press and hold simultaneously the
VOX
key (
7
) and the
EMG
(
8
) key (
5
) to
lock/unlock
then unit.
“
”
appears
on the display when the function is on.
Note:
The
PTT
switch (
11
) remains enable while the unit is
locked.
9) USB CHARGING SOCKET
The
USB
socket (
9
) can be used to
charge
a smartphone,
tablet or other rechargeable device with 5 V - 2.1 A.
10) 6 PIN MICROPHONE PLUG
The plug is located on the front panel of the transceiver
and makes the setting of the equipment into the dash-
board easier. The BILL II FCC accepts electret or dynamic
microphone
(consult the menu
MIC TYPE
page 14)
.
See cabling diagram page 72.
11) PTT (Push To Talk)
Transmission key, press
PTT
switch to
transmit
a message,
is displayed and release to
listen
to an incoming
communication.
TOT (Time Out Timer)
If the
PTT
switch (
11
) key is pressed for more than 3 minutes,
the display starts blinking and the transmission ends.
A beep will sound until the
PTT
switch (
11
) key is released.
C) FUNCTION WITH THE PTT SWITCH
1) VOX
Press and hold then
PTT
switch (
11
) and then press the
VOX
key (
7
) to
activate
/
deactivate
the
VOX
function.
“VOX”
appears on the display when the function is on.
See the §
VOX SET
page 11
.
D) FUNCTION TURNING ON THE UNIT
1) ENTER MENU
The order of the 8 menu,
,
,
,
,
,
,
and
is as described in this
manual. However, the menu displayed by entering the
MENU
will be the last menu modified by user.
The procedure is the same whatever the function is.
1.
Turn off the unit.
2.
Turn on the radio while pressing the
AM/FM
key (
7
). is
displayed.
3.
Use
s
/
t
key (
3
) on the unit or
UP
/
DN
buttons on the
microphone (
3
) to
select
the menu.
4.
Press the
AM/FM
key (
7
) to
validate
the selected menu.
If the function have more than 1 parameter press the
AM/FM
(
7
) key to
select
the next parameter...
5.
Use
s
/
t
key (
3
) on the unit or
UP
/
DN
key (
3
) on the
microphone to
change
the value of the parameter.
6.
Press the
AM/FM
key (
7
) to
confirm
and
select
another
menu or press the
PTT
switch (
11
) to
confirm
and
exit
menu.
7.
The unit automatically
exits
the menu after 10 seconds.
English