10
The channel is stored on the memory scan skip
Indicates the reception level and the output power
level
Emergency channel 1 (customizable) is activated
Emergency channel 2 (customizable) is activated
KEY LOCK function is activated
NB filter is activated
HI-CUT filter is activated
ANL filter is activated
SCAN function is activated
Indicates the frequency, the current menu, for
Alert or the messages
Indicates current channel
5) CB/WX (WEATHER CHANNEL) ~ ALERT
CB/WX (WEATHER CHANNEL)
(short press)
CB functions are not allowed in
WX
mode. If user presses
a not allowed key and
KEY BEEP
function is activated,
the radio sounds error tone.
Press the
CB/WX
key (
5
) to
alternate
between
CB
and
WX
mode. When
WX
mode is activated,
“
”
appears
on the display.
The
WX
mode allows to hear weather information. When
the mode is activated, use the
s
/
t
keys (
3
) on the unit
or the
UP
/
DN
keys on the microphone to
move
through
the 7 weather channels to find the active channel in your
local area
(see
WEATHER FREQUENCY TABLE
page 71)
.
The display shows the selected weather channel and if
the unit receives a signal,
“
”
and
“ ”
icons blink.
ALERT
(long press)
The SIREN tone
only sounds in
CB
mode. It does not sound
in
WX
mode.
Long press the
ALERT
key (
7
), in order to
activate
/
deac-
tivate
the
ALERT
function. When the function is activat-
ed, is displayed. If a tone is detected at the selected
weather channel, then the unit sounds SIREN tone. The
unit cancel
CB
mode and go to
WX
mode.
During a SIREN tone sound, press
PTT
key (
11
) to stop the
sound.
6) ANL/NB ~ HI-CUT ~ SKIP
ANL/NB
(short press)
A short press on the
ANL/NB
key (
6
) allows you to
activate
the following settings: no filter (default) /
ANL
activated
/
ANL
and
NB
activated.
The icon of the active filter appears on the display.
NB:
Noise Blanker /
ANL:
Automatic Noise Limiter. These
filters allow reducing back ground noises and some
reception interferences.
Warning:
ANL
filter works only in
AM
mode
HI-CUT
(long press)
Long press the
HI-CUT
key (
6
) to
activate
/
deactivate
the
HI-CUT
filter. When the filter is activated
“HI-CUT”
appears
on the display.
HI-CUT:
Cuts out the high frequency interferences and has
to be used in accordance with the reception conditions.
When active, the filter is displayed on display.
English