Presence iPecs LIP-9008, Operation Manual, Page: 18 / 23

Operation Guide Add On Packet LIP-9008 and LIP-9008G
4. If accepted the station will sound a confirmation tone.
5. Hang up.
6. The station screen will now indicate the current call forwarding state.
Canceling call forwarding
1. Go off-hook and press [DND].
2. Press [#]
3. The station will sound a confirmation tone.
4. Hang up.
5. The station screen will no longer indicate the station is forwarded.
Call coverage
Call coverage is not traditional call forwarding. Instead it causes the configured station to ring when
another station receives a call and show on the screen “Call for” the other station.
Call coverage requires a flexible button be committed to the feature for every extension the station
intends to cover.
Call coverage will not ring through mobile extension at default. Contact support to enable this if
required.
Allowing or disallowing call coverage
By default, a station may not be call covered. Follow these directions to allow or stop others from
call covering your station.
1. Press [Transfer] [141]
(a) The screen will show an on/off option for call coverage mode.
2. Dial [1] to enable or [0] to disable.
3. Press [Hold] to save your selection.
Programming the covering station
At the station meant to cover another, complete the following to enable call coverage.
1. Press [Transfer]
2. Press the flexible button you wish to program.
(a) A tone will sound and the programming of the selected button will be displayed on the screen.
3. Dial [*76] followed by the extension you wish to cover.
Page 14