Presence iPecs LIP-9008, Operation Manual, Page: 12 / 23

Operation Guide Add On Packet LIP-9008 and LIP-9008G
Program a flexible button with an extension
1. Press [Transfer]
2. Press the flexible button you wish to program.
(a) A tone will sound and the programming of the selected button will be displayed on the screen.
3. Enter the extension number you want programmed on the selected flexible button.
4. Press [Hold]
5. Repeat steps 2 through 5 if additional flexible buttons require programming.
6. Press [Speaker] to exit programming.
Program a flexible button with a feature code
1. Press [Transfer]
2. Press the flexible button you wish to program.
(a) A tone will sound and the programming of the selected button will be displayed on the screen.
3. Enter the feature code you want programmed on the selected button.
(a) Page 19 lists feature codes detailed in this document.
i. If any code shows a [Transfer] in the feature code column it must be pressed along with the
shown digits.
4. Press [Hold]
5. Repeat steps 2 through 5 if additional flexible buttons require programming.
6. Press [Speaker] to exit programming.
Program a flexible button with a phone number
1. Press [Transfer]
2. Press the flexible button you wish to program.
(a) A tone will sound and the programming of the selected button will be displayed on the screen.
3. Dial [9] followed by your phone number.
4. Press [Hold]
5. Repeat steps 2 through 5 if any additional flexible buttons require programming.
6. Press [Speaker] to exit programming.
Program a flexible button with a speed dial
1. Press [Transfer]
Page 8