background image

Caution

Do not over 

tighten any screw.

The last few turns 

of each screw 

should be done 

very slowly or by 

hand.

Required Tools

stud 

finder

3/16th inch drill bit

CONTACT US FIRST

[email protected]

1-877-PREPAC1

1-877-773-7221

Mon - Fri 

7am - 4pm PST

 

 

10am - 7pm EST

For help with assembly

If you have received a damaged or defective 

part or are missing hardware. 

 

We will process replacement parts in 2 business 

days or less. Parts are shipped via UPS Ground or 

mail.

Before you call please:

1) 

Record the following information from the 

shipping label on the outside of the box.  

You will need it for warranty purposes:

 

Ship To Name 

 

Sales Order Number

2)  

Note the product model number.

3)  

Review the contents of your shipment to 

determine what you are missing.

Traditional 

Floating Desk 

Model #  EHW-0800-1

Online Option

Fill out the Replacement Parts Order form in the Product 

Support section of our website: www.prepacmfg.com

Assembly Instructions

Prepac Manufacturing Ltd.

6705 Dennett Place

Delta, BC V4G 1N4

2 Person Installation Required

DA

TE ST

AMP

Total Maximum 

Weight

100 lbs

LB-0745

2014-06-09

Scan the 

QR code 

to view an 

installation 

video for 

this product

Summary of Contents for EHW-0800-1





















Reviews: