dry.
·Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
·When moving the refrigerator, do not tilt i t beyond 45°
from upright position.
CLEANING BEFORE USE
After you remove
all of the packaging materials, clean the
inside of your refrigerator before using it.
SPACE REQUIREMENTS
WARNING: Keep flammable materials and vapors, such
as gasoline, away form refrigerator.Failure to do so can
result in death,explosion, fire or burns.
·To ensure proper ventilation for your refrigerator, allow for
200mm space on each side between walls, 100mm space
between the back of your refrigerator and the wall, and 300mm
space between the top and the cabinet or ceiling.
·If you are installing your refrigerator next to a fixed wall,
leave enough space on the hinge side to allow for the door
to swing open.
·Never install your refrigerator near a heat source or direct
sunlight.
ELECTRICAL REQUIREMENT
WARNING: DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTOR.
DO NOT USE AN EXTENSION CORD.
4
Summary of Contents for PRF31500MW
