Premium 0503ABWVAG70P, Operating Instructions Manual

Page: 12 / 61

Проверил: Р.Ч./07.2015г
10
applied at low pressure.
The combination of chemical action and
high pressure rinsing is very effective. On
vertical surfaces, apply the detergent
starting at the bottom and work your way
upward. This will prevent the detergent from
sliding down and causing streaks. High
pressure rinsing should also progress from
the bottom to top. On particularly tough
stains, it may be necessary to use a brush
in combination with detergents and high
pressure rinsing.
Operation
The following cleaning procedure will help
you to organize your cleaning task, and
ensure that you achieve the most beneficial
results in the shortest amount of time.
Remember to use the spraying/cleaning
techniques previously listed.
1. Surface preparation
Before starting a pressure wash cleaning
job, it is important to prepare the surface
that is to be cleaned. This is done by
cleaning the area of furniture, and making
sure that all windows and doors are closed
tight. In addition, you should make sure that
all plants and trees adjacent to the cleaning
area are protected by a drop cloth. This will
ensure that your plants won’t be sprayed by
the detergents.
2. Initial High Pressure Rinse
The next step is to spray the cleaning
surface with water to clear off any dirt or
grime that may have collected on the
surface. This will allow your detergent to
attack the deep down dirt that has worked
its way into the cleaning surface. Before
triggering the gun, adjust the nozzle to a
wide fan pattern and slowly adjust to the
desired spray pattern. This will help you
avoid applying too much concentrated
spray to the surface which could cause
damage.
3. Detergent Application
USE THE INSTRUCTIONS
APPROPRIATE FOR MODEL
PURCHASED
NOTE:
Use only detergents formulated for
pressure washes.
NOTE:
Test detergent in an inconspicuous