Premium Poly Patios Amish Poly Van Buren Sofa WV-992-P, Assembly Instructions

Page: 1 / 2

2" Screws, Center Leg Assembly
Tools Needed: hammer, 7/16" wrench, #2 square bit screw driver or power driver, punch
No drilling is required. All the necessary holes are predrilled. Bolts fit snugly in the holes. You may
need to use a hammer to drive the bolts through the holes.
Hardware List for Chair: forty-six 2" screws
Hardware List for Love Seat: fifty-eight 2" screws
Hardware List for Sofa: seventy 2" screws
Parts
Step 3 — For Love Seat and Sofa Only
Assembly Instructions
Mission and Van Buren Deep Seating
Step 1 — Install Back Rails
Secure the back rails using two 2" screws in each rail us-
ing the pilot holes. Set the assembly upright and secure
the other side assembly in the same way.
Position each leg with 20¼" (20" for sofa) in between
the two legs. Measure the top and bottom of the leg to
make certain the leg is straight. Secure with 2" screws
in pilot holes in leg assembly and back slats.
Lay a side assembly on a protected surface such as
cardboard or blankets.
4 Back Rails
2 Side Assemblies
Skirt Board
2" Screws, Back Rails
2 Arm Assemblies
4 Seat Slats
Hardware
Step 2 — Install the Skirt Board
Use 2" screws in the pilot holes of the front skirt board
to secure it to the side assemblies.
2" Screws, Skirt Board
Premium Poly Patios
www.Poly-Lumber-Furniture.com Toll Free - 1-877-904-1234