Installation and service of this product should be conducted by a trained
personnel to avoid any bodily injury from electric shock or heavy object
Observe ESD (Electrostatic Discharge) practices during integration to avoid
possible damage to the board and / or other components
eDrawer4060J-S3 Quick Guide
Version 1.10
–
2017.02.21
1.
Check the content
of the box. Please confirm that
your package contains the following:
# Description
Image / Description
Qty
1
eDrawer4060J-S3
Enclosure
1
2
Screw Set for
Mounting Drives*
1 set
3
Expander Module
1 or 2
4
Power Cable*
2
5
Serial Cable*
1
6
Rail, Bracket, and
screws*
2 sets
7
Chassis Handle*
2
8
Support Bar
2
9
SFF 8644-8644 / SFF
8088-8644 SAS cable
optional
2
10 This Quick Guide
1
11 Packaging
1 set
* Inside the accessories box. If any items are missing, please contact
your authorized reseller or sales representative
2.
Get familiar with the unit.
Front view of the unit
Rear view of the unit
Expander Module
3.
Remove the Unit
from the packaging. Use chassis
handles to help lifting the unit from the box.
4.
Pull the Drive Module out
of the unit as indicated
in order to install disk drives. It is recommended to install
HDDs after the unit is mounted to the cabinet.
Drive module cannot be completely removed. Drives can be
inserted and removed from the module while system is
running without disrupting the operation.
5.
Install HDDs
as illustrated below. SAS and SATA drives
may be sold separately. SAS drives are required for
eDrawer4060J-S3 configuration with dual expander.
6.
Prepare the Rack Posts
with square nuts (red
squares). Red circles are location for support bar screws.
Proceed to install the rear brackets and apply M5x10L screws.
Do NOT tighten yet. Allow wiggle room for rail installation.
7.
Install the Support Bar
to the rack.
Thank you for your purchase of Premio eDrawer4060J-S3 Storage System!