P-18
In Radio Mode, touch and keep (for more
than 2 ’ S) the screen of “ APS ” range to
active automatic station storage.
The radio searches within the current
frequency band, e.g. FM1, for the stron-
ger signal level until the search cycle
has finished . The six strongest stations
are then allocated to the corresponding
storage locations .
Then the station of the first storage
location is set .
Automatic Memory Storing &
Program Scanning
Automatic Preset Setup
Scan Function
In Radio mode, briefly touch the “APS”
section on the touch screen , the radio
briefly plays all the preset stations of the
frequency band .
Storing Stations in Memory
Setting Memory
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
- Store in Memory
>Select the frequency band
>Select the station
>Keep the desired memory key pressed
in until the station is heard again after
a brief interruption .
- Retrieve a preset station
Touch the 1-6 ranges briefly to retrieve
a station which had been stored in the
memory in advance the chose number
is shown on display .
Touch the “ Sound ” section on the
setting menu, touch the “ / ” ranges
to select the “ Radio L/D ” item, touch the
“ / ” ranges to choose between the
LOC and DX mode of Local and Long-
distance traffic news
.
RADIO LOC/DX
DX
1
1 87.50
87.50
106.10
106.10
4
4
2
2
90.10
90.10
5
5
107.00
107.00
6
6
88.50
88.50
98.10
98.10
3
3
87.50
87.50
MHZ
MHZ
FM1
FM1
1
1 87.50
87.50
106.10
106.10
4
4
2
2
90.10
90.10
5
5
107.00
107.00
6
6
88.50
88.50
98.10
98.10
3
3
87.50
87.50
MHZ
MHZ
FM1
FM1