DO NOT DRILL
OUT THIS HOLE
ON BOTH SEATS
5
6
7
2
4
3
1
Drill plastic out of the holes using a 7/16" diameter drill bit.
1.
Attach both legs to the inside of the table support bar (see view above).
2.
Attach the seats to the legs.
3.
Attach the straight end of each brace to the table (see view above).
4.
Attach the bent end of each brace to the cross bar of each leg (see view above).
5.
Tighten up all fixings.
6.
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
642-011
4' Champion Table Top
1
2
634-010
Free Standing Table Stand For Seats
2
3
622-011
Champion 4' Seat/Back
2
4
634-011
4ft FS Table Brace 19 1/4"
2
5
516-058
3/8"x1-1/2" SS Hex Bolt
16
6
516-023
3/8" SS Flat Washer
32
7
516-028
3/8" SS Nylock Nut
16
X.01
924-101
4' Champion Rectangle Table, Free Standing
SHEET 1 OF 2
REV.
A
SIZE
In accordance to California law: WARNING - This product contains a chemical known to the
State of California to cause cancer and birth defects or other reproductive harm.
