background image

Page 1 

 

Installation Instructions

 

 

Installation Instructions 

9531-000-061-00

Parts List

MM-CP15/28/42

(Varied sized pole with clamp) 

(Qty 1)

The MM-CP15 is the 15” 

single pole for multi-monitor 

mounts with clamping base. 

The MM-CP28 is the 28” 

version, and the MM-CP42 is 

the 42” version. These three 

different pole sizes provide 

more mounting options for 

those installing multi-monitor 

mounts. The larger the pole, 

the more displays that can 

be mounted per single base. 

Clamp installations are 

versatile and attach to desks, 

cubicles or any standard 

tabletop.

Step 1

Multi-monitor mounts with clamping bases easily secure to a variety of flat 
surfaces including desks,cubicles, or any standard tabletop. 

First, determine where you would like your multi-monitor mount positioned 
on your desired surface. The mounting surface should be capable of 
supporing 5x the weight of the flat-panel and mount. (Mount & flat-panel 

        sold separately)

Step 2

Step 3

3/8” x 1/2” Button Head Screw 

(Qty 2)

 

MM-CP15

MM-CP28

MM-CP42

Allen Key (Qty 1)

Determine your surface thickness, the clamping 
base is adjustable from 1” to a maximum of 4”. 

1. 

To adjust to desired size, remove the pre-
installed 3/8” x 1/2” button head screws 
with a 6mm allen key (shown in figure 1 to 
the right) 

2. 

Reposition them by moving the existing 
screw holes on the bottom portion of base 
so that they are aligned with one of the 3 
pairs of holes in the back bottom portion. 

3. 

Re-install the 3/8” x 1/2” button head 
screws through the the back portion and 
bottom piece so that  the pole and clamp 
are secure. 

2

1

3

Introduction

MM-CP15/28/42 

1. 

Once the clamp base’s opening is large enough to easily fit onto 
your desired surface, slide the base onto the surface.

2. 

The top portion with the pole size you have chose is positioned 
above the surface, and the  bottom portion with the tightening 
screw nobs are below the surface. 

3. 

Twist the screw nobs (one at a time) so that they are 
firmly gripping the bottom of of the table and the top  
of the base is pressing firmly on the upper surface 
(see figure 2 below). 

28”

42”

15”

PREMIER MOUNTS

LIMITED LIFETIME WARRANTY

What and Who is Covered by this Limited Warranty and for How Long

Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the 

original owner of this product.  The limited warranty is valid only for the original purchaser of the product.

What Premier Mounts Will Do

At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is 

defective.  If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be 

shipped to you at no charge, but you must pay any labor costs. 

What is Not Covered; Limitations

PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, 

PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM 

IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS PRODUCTS. 

PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES 

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  PREMIER MOUNTS IS NOT 

RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, 

INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE 

PRODUCTS OR PARTS.  SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  

What Customers Must Do for Limited Warranty Service

If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the 

address below within thirty (30) days.  Proof of purchase (an original sales receipt) from the original consumer 

purchaser must accompany all warranty claims.  Warranty claims must also include a description of the problem, 

the purchaser’s name, address, and telephone number.  General inquiries can be addressed to Premier Mounts 
Customer Service at 1-800-368-9700.  Warranty claims will not be accepted over the phone or by fax.
 

Premier Mounts

 

Attn: Warranty Claim

  

3130 East Miraloma Ave.

  

Anaheim, CA  92806

How State Law Applies

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH 

VARY FROM STATE TO STATE.

3100 E. Miraloma Avenue, Anaheim, CA 92806 | 800.368.9700 USA | F  800.832.4888 |

 

www.mounts.com

 

Unit 3, The Moorings Business Park, Channel Way | Longford, Conventry, CV6 6RH, UK |

 

+44 (0) 2476 644105 | F +44 (0) 2476 644165

Reviews: