Yellow VW Thing Spinner
assembly
instructions
Step 1
Remove your Yellow VW Thing Spinner from the package. The Strut Assembly is shipped in three sections. Open the Velcro seam along the
bottom of the VW. Connect the Rod of the Front Strut Assembly to the Star Lock Hub of the Internal Rear Strut Assembly. (Diagram A)
Step 2
Slide the narrow, plastic tipped end of the Support Pole into Star Lock Hub. Push down on the hub until the Support Pole locks into place
and cannot be removed. Close Velcro Seam. (Diagram B)
Completed Internal Strut Assembly.
Make sure all parts connect as shown.
sku #26822
B
Body Sleeve
A
Plastic Tip of Support Pole
Support Pole
Push Star Lock Hub firmly
onto Plastic Tip of Support Pole
NOTE: To make insertion process
easier, place bottom of Support Pole
on a hard, flat surface and push
down on Star Lock Hub.
Star Lock Hub
Body Sleeve
Velcro
Seam
Front Strut Assembly
will have to be
connected to
Internal Body Struts
Rear Strut Assembly
(Internal Body
Struts)
Star Lock Hub
