Page 2
For technical questions, please call 1-888-866-5797.
ITEM 69727
Table of Contents
Specifications ............................................. 2
Safety ......................................................... 3
Setup .......................................................... 6
Operation .................................................... 8
Maintenance .............................................. 12
Troubleshooting ......................................... 16
Warranties ................................................. 18
Parts Lists and Diagrams .......................... 20
Specifications
Displacement
212cc
Engine Type
Horizontal Single Cylinder
4-stroke OHV
Meets EPA phase III and CARB
emissions standards
Cooling System
Forced air cooled
Fuel
Type
87+ octane stabilizer-treated
unleaded gasoline
Capacity
0.9 Gallon
Engine Oil
Type SAE
10W-30 above 32° F
5W30 at 32° F or below
Capacity
0.5 Quart
Run Time @ 50% Load
with full tank
3 hr.
Sound Level at 22 feet
104 dB
Bore x Stroke
70 mm x 55 mm
Compression Ratio
8.5:1
Rotation
viewed from PTO
(power takeoff - the output shaft)
Counterclockwise
Spark Plug
Type
NGK
®
BP-6ES
NHSP
®
/ Torch
®
F6TC
Gap
0.027" - 0.031"
Valve Clearance
Intake
0.004" - 0.006"
Exhaust
0.006" - 0.008"
Speed
Idle
1,800± 50 RPM
Shaft
Shaft
Ø0.75″ x 2.43″
Keyway
3/16″
End Tapped
5/16″ - 24 UNF
The emissions control system for this Engine is warranted for standards set by the
U.S. Environmental Protection Agency
and by the California Air Resources Board (also known as CARB).
For warranty information, refer to the last pages of this manual.
