Precor TRM10/GEN06, Service Manual

Page: 100 / 149

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 98
Replacing the Power Control Module
1
Set the treadmill’s on/off switch in the off position and remove the
AC line cord from the AC outlet.
2
Remove the treadmill’s hood.
3
Disconnect the COMM, INCLINE, INPUT, DB and OUTPUT connectors from the
power control module.
Figure 36: Power Control Module
4
Remove the four screws that mount the power control module. See Figure
Below (Lower Control Module Mounting.
Figure 37: Lower Control Module Mounting
5
Set the replacement power control module in its mounting position.