Operation Verification
The Operation Verification tests verify that the machine is operating correctly and can be
returned to service. Do these operation verification tests at the end of a maintenance pro-
cedure or whenever it is necessary to ensure that the machine is operating properly. There
are separate procedures for the R40 and R20 consoles
R40 Operation Verification Test
The Operation Verification Test applies to equipment configured with the R40 console. Com-
plete each test to verify the equipment operation.
Error Code Verification Test
Verify that there are no current active logged error codes:
1. Access the
Error Log
and record any current active logged error codes:
l
From the
Home
screen press
Settings
>
Information
>
Error Log
. Take
note of all the errors starting with
C – 001
. Also note the error odometer
information which can help determine the age and relevance of the error.
2. Resolve any current active logged error code issues.
3. Press
HOME
to exit the Error Log.
4. Clear error codes and Reset the Error Log:
l
Access the Hardware Validation (51765761) service menu, see
l
Use the down arrow softkey to scroll down and select the
Error Log
Reset
softkey.
l
Select
Test
>
Start
. The screen will transition to the
System Settings
menu. The test will run but there will no messages or indicators showing
that it has completed.
5. Verify that all active error codes have been cleared from the
Error Log
.
l
Cycle the power OFF/ON.
l
Wait for the power-up sequence to complete, then go to the
Error Log
and
verify that all active error codes errors starting with
C – 001
) have been
cleared (press
Settings
>
Information
>
Error Log
).
l
Press
Home
to exit.
Hardware Validation Tests Verification
Verify that each ot following Hardware Validation tests are successfully completed.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 17
3 Operation Verification
R40 Operation Verification Test
