Precor Experience Series Service Manual Download Page 38

Page: 38 / 248

CLUB SETTINGS

DESCRIPTION

HIDDEN
PROGRAMS

(2)

Either enabled or disabled, the setting allows the unit to access
specialized fitness tests designed for police, fire fighters and the
military.

Default: disabled

MAINT CONFIG

(1)

(ASL equiped modeld only)

Enable/disable the ASL pulsing blue light maintenance counter
reminder function:

ON - Enable

OFF - Disable

SET CUSTOM
PROGRAM 1/2

Sets the use of a customized workout program.
Range: ON/OFF
Default: OFF

Note: The Total Body Workout can only be turned on in this Club
Settings menu.

(1) Onlu used on products that have the ASL feature. Not included on the EFX600 series,
the TRM600 series, or the

TRM800-10

(

TRM10

/GEN06) series products..

(2) Custom option, not included on all consoles.

Information Display (65)

Service Access Code: 65 (see

"Service Menu Access Codes" on page 19

)

Provides the equipment usage, hardware, software, error code, and maintenance inform-
ation.

INFORMATION DISPLAY

DESCRIPTION

ODOMETER

The total number of accumulated miles on the unit.

This value is stored in the upper

PCA

in the console so if

the PCA is replaced the accumulated miles would start
again from "0".

HOUR METER

The total number of hours that the unit took to accumulate
unit miles.

This value is stored in the upper PCA in the console so if

TRM800 version 1 treadmills mfg. dates 2010 thru 2014.

Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 30

4 Standard Service Menus

LED Console Standard Service Menus

Summary of Contents for Experience Series

























































































































































































































































Search results

Summary of Contents for Experience Series

Reviews:

Precor Experience Series, Service Manual, Page: 38 / 248

Search results

Summary of Contents for Experience Series

Reviews: