Precor Experience 700 line Series, Service Manual

Page: 163 / 232

Standard Error Codes
About
There is a set of standard error codes implemented across Precor exercise equipment. Error
codes are system generated error codes designed to detect and report fault conditions. Each
error code is associated with a particular system or component fault condition. The main-
tenance software monitors error code event conditions, when a fault is detected, the error
code is stored in the Error Log (or
CPA
1
Event Log) along with the event mileage, hours, and
motor current.
Error code numbers range from 01 to 99. There are also a small number of alpha and alpha-
numeric codes. Most, but not all error codes are grouped into numeric ranges to help easily
identify common system issues. Refer to the
Error Code Troubleshooting Guide for a com-
plete list of error codes and troubleshooting information.
IMPORTANT : Error Code description and Troubleshooting information is contained in
the
Error Code Troubleshooting Guide, see
Error Code Guide.pdf .
1
Control Processing Assembly
Page 155
6 Troubleshooting
Standard Error Codes