Precor EFX 245 Quick Start Card Download

Page: 87 / 107

EFX 400 Series Assembly Guide

Getting Started

Thank you for choosing Precor. For proper installation, please read this guide

thoroughly and follow the assembly instructions. If you do not assemble the EFX

according to these guidelines, you can void the Precor Limited Warranty.

Obtaining Service

Do not service the EFX except for maintenance tasks as described in the owner’s

manual. For more information regarding customer support numbers or a list of

Precor authorized service dealers, visit the Precor web site at www.precor.com.

Installation Requirements

CAUTION: You will need assistance to assemble this unit. DO NOT attempt assembly

by yourself.

Follow these installation requirements when assembling the unit:



Assemble the EFX near the location where you plan to use it and provide

ample space around the unit.

Important:

Consult your owner’s manual for proper placement of your equipment.



Assemble the EFX on a solid, flat surface. A smooth, flat surface under the

EFX helps keep it level, and a level EFX will have fewer malfunctions.



Open the box and assemble the components in the sequence presented in this

guide. If you plan to move the unit, obtain help and use proper lifting

techniques.



Do not grasp any plastic part while lifting or moving the unit. The plastic parts

are not reinforced and they may break.



Obtain assistance. Ask another capable adult for assistance during the

assembly process.



Use your fingers or the appropriate tools to insert fasteners. Proper alignment

helps alleviate crossthreading. Do not fully wrench tighten fasteners until

instructed to do so.

Unpacking the Equipment

The EFX is carefully tested and inspected before shipment. The unit is shipped in

two boxes. Ask for help from one or more people to unpack and assemble the

treadmill. If any items are missing, contact your dealer.

WARNING

Do not attempt to move the equipment by yourself. Have at

least one other person help you and use proper lifting

techniques.

To unpack the equipment:

Carefully cut and remove all plastic straps that secure the cover on the

cardboard box.

Lift the cover upward and set it aside.

Pull the cardboard or foam spacers away from the equipment and set them

aside.

Cut all plastic ties securing the equipment in place.

Remove and set aside the enclosed box and loose accessories.

Remove the base frame assembly from the container and set it on the floor

where you plan to assemble and use the equipment.

Required Tools



¹₂

-inch socket wrench with extension



Adjustable wrench



Wire cutter



⁹₁₆

-inch socket wrench



¹₂

-inch open-end wrench (for EFX 447 and 425 models only)

Summary of Contents for EFX 245












































































































Search results

Summary of Contents for EFX 245

Reviews:

Related manuals for EFX 245

Brands by name

Popular brands

Precor EFX 245, Quick Start Card

Search results

Summary of Contents for EFX 245

Reviews:

Related manuals for EFX 245

Brands by name

Popular brands