Precor CW-202, Assembly Manual

Page: 9 / 44

CW-202 Assembly Guide
page 9
Assemble the Unit
1. Attach the Base Assembly to the Upright Frame
using
four ¾-inch buttonhead screws (A)
four ½-inch split washers (B)
Wrench tighten.
2. Press the handle on the Base Assembly and slide
the Seat Adjustment into the Base Assembly.
Release the handle while the pin is aligned with
one of the holes in the Seat Adjustment. Secure
the Seat Adjustment using one shoulder bolt (C).
Wrench tighten.
Assemble the Unit
4 - ¾” buttonhead screws
4 - split washers
1 - ½” shoulder bolt