Precor CW-113, Assembly Manual

Page: 8 / 44

CW-113 Assembly and Maintenance Guide
page 8
Assemble the Unit
Assemble the Unit
1. Attach the Main Frame to the Stabilizer using
four ¾-inch buttonhead screws (A)
four
³⁄₈
-inch split washers (B)
Wrench tighten.
Note: Make sure the wheels on the Stabilizer are
positioned as shown in the illustration.
2. Attach two Spring Cushions to the Main Frame
using
two 2¾-inch buttonhead screws (C)
two
³⁄₈
-inch split washers (B)
two
³⁄₈
-inch washers (D)
Wrench tighten.
3. Insert two Springs onto the Spring Cushions.
4. Turn the Back Support over and attach the Back
Adjustment to the Back Support using
four ¾-inch buttonhead screws (A)
four
³⁄₈
-inch split washers (B)
Wrench tighten.
4 - ¾” buttonhead screws
4 - split washers
2 - 2¾” buttonhead screws
2 - washers
2 - split washers
2 - Spring Cushions
Spring Cushion
4 - ¾” buttonhead screws
4 - split washers