21
2.7.5
Status LED
LED status / CHRocodile C Status
Table 2.4: Status LED during functioning
No signal
High intensity signal
Medium intensity signal
Low intensity signal
Optimal intensity signal
(blink) Saturated intensity signal
No signal
Far Range
Mid Range
Near Range
(blink) Out of range : too far
(blink) Out of range : too close
Power OFF
Power ON, Firmware boot failure
(blink) Power ON, Triggering session
(1)
Power ON, Waiting for trigger
(1)
green when triggered at high frequency
Power ON, Firmware is configured / Continuous measurement
Summary of Contents for CHRocodile C
