background image

Thank you for choosing 

PPI

audio epuipment. Now, HANG ON! 

PPI

products are engineered and manufactured to deliver a wild ride of 
performance, sound quality, and reliability.  This 

PPI

product reflects our com-

mitment to offer you versatility and quality for years of incredible power and
listening enjoyment!

SERVICE

Do not attempt to service 

PPI

products yourself. Performing exploratory 

surgery on your audio equipment yourself will void the warranty.  All parts of
your 

PPI

gear have been built to our specifications. These parts are not made

available to any unauthorized 

PPI

dealer nor are they for sale. Our goal is to

make sure that your 

PPI

product will always perform as good as the day it

was purchased. Contact your authorized 

PPI

dealer about obtaining any war-

ranty service through 

PPI

. (See Warranty inside back cover.)

CAUTION!

The extended use of a high powered audio system may result in hearing loss
or damage.  While 

PPI

systems are capable of "Concert Level" volumes, they

are also designed for you to enjoy at more reasonable levels all of the cre-
ative expressions made by musicians. Please stay seated while driving and
observe all local sound ordinances. 

Summary of Contents for PPI4.2














Reviews: