Helios Large Display Dual Analog Input Rate/Totalizer Instruction Manual
PD2-6262
56
Analog Output Source
The analog output source can be based on either of the input channels (Ch-A, Ch-B), the math channel
(Ch-C), maximum stored value of either input channel (Hi-A, Hi-B), minimum stored value of either input
channel (Lo-A, Lo-B), relay set points, or the Modbus input.
To base an analog output on the rate, total, or grand total of channels A or B, select the channel in the
Analog Output Source
menu. Then select the rate, total, or grand total as the source reference for the
output, and program the output scale.
Programmable Function Keys User Menu (
user
)
The
User
menu allows the user to assign the front panel function keys F1, F2, and F3, the digital input F4
(a digital input located on the signal input connector), and up to eight additional digital inputs to access
most of the menus or to activate certain functions immediately (e.g. reset max & min, hold relay states,
etc.). This allows the meter to be greatly customized for use in specialized applications.
Up to eight digital outputs can be assigned to a number of actions and functions executed by the meter
(i.e. alarms, relay acknowledgement, reset max, min, or max & min, tare, and reset tare). The digital
outputs can be used to trigger external alarms or lights to indicate these specific events.
*If installed
