Loop Leader PD6622/4 Loop-Powered Rate/Totalizer Instruction Manual
16
Main Menu
The main menu consists of
all the meter’s programmable functions:
Input
,
Output, Advanced,
and
Dis-
play
.
Press
Menu
button to enter
Pro-
gramming Mode
then press the
Right-Arrow
button to move for-
ward through the menu and the
Up-Arrow
button to move back.
Press
Menu
at any time to exit and
return to
Run Mode
. Changes
made to settings prior to pressing
Enter
are not saved.
Changes to the settings are saved
to memory only after pressing
En-
ter/F3
to confirm the setting or
pressing
Enter/F3
at the
SAVE?
screen when available.
Setting Numeric Values
The numeric values are set using the
Right
and
Up-Arrow
buttons. Press
Right-Arrow
to select next
digit and
Up-Arrow
to increment digit value. The selected digit will flash.
Press and hold
Up-Arrow
to auto-increment the display value. If you have made a mistake or would like
to enter a new value, select the left-most digit and press and hold the
Right-Arrow
button until all digits
reset to zero.
Press the
Enter
button at any time to accept a setting or
Menu
button to exit without saving changes.
Note:
the underscore in the graphic below is provided to show which digit would be flashing.
DSP 1
+00,000.00
DSP 1
00,000.00
Select
Digit to
Change
DSP 1
00,050.00
Increment
Selected
Digit
SCALE
INPUT 1
Accept
Setting
52.86
38,418.2
SETUP
INPUT
SETUP
OUTPUT
SETUP
ADVANCED
SETUP
DISPLAY
SCALE
RATE
OPEN
COLLECTR
ADV
RATE
DSPLY
UNITS
OUT
RELAY
OUT
4-20 mA
OUT
CONTROL
CUTOFF
FILTER
PASSWRD
USER
SYSTEM
DSPLY
DEC.PT
DSPLY
COMMA
DSPLY
TOP
DSPLY
DOTTOM
SCALE
UNITS
SCALE
INPUT 1
SCALE
DISP 1
SCALE
INPUT 2
SCALE
DISP 2
SAVE?
ADV
TOTAL
ADV
GTOTAL
Run Mode
