P
RO
V
U
™ PD6310-WM NTEP Certified Pulse Input Batch Controller
Instruction Manual
44
Additional Features
At any time during the batch, the STOP button may
be pressed to pause the batch. When paused,
pressing the START button will continue the batch,
and pressing the STOP button again will cancel the
batch.
When in STOP mode, the STOP button may be
pressed to cycle through alternative parameters to be
displayed on the lower display, including the grand
total, batch count, and preset.
The grand total and batch count may be reset in the
reset
menu by pressing the MENU button and
entering the reset menu. It may also be reset with
digital inputs.
Automatic Batch Control
The automatic batch control feature is used for batch
processes where the batch size does not change.
Setup for Automatic Batch Control
The batch controller can be configured to
automatically start a new batch after the selected time
delay between batches has elapsed.
The time delay allows time for removing the full barrel
and putting an empty barrel in place. Once the
process starts, the operator does not have to press
any buttons; except to pause or stop the batch
process.
