P
RO
V
U
™ PD6200 Analog Input Rate/Totalizer
Instruction Manual
21
Main Menu
The main menu consists of the most commonly used
functions:
Reset, Control, Setup
, and
Password
.
•
Press Menu button to enter Programming Mode,
then press the Up arrow button to scroll main
menu.
•
Press Menu, at any time, to exit and return to
Run Mode. Changes made to settings prior to
pressing Enter are not saved.
•
Changes to the settings are saved to memory
only after pressing Enter/F3.
•
The display moves to the next menu every time a
setting is accepted by pressing Enter/F3.
Setting Numeric Values
The numeric values are set using the Right and Up
arrow buttons. Press Right arrow to select next digit
and Up arrow to increment digit value. The digit being
changed is displayed brighter than the rest. Press and
hold Up to auto-increment the display value. If
negative numbers are allowed, the first digit position
will include a negative symbol (
-
) after the 9.
Press the Enter button, at any time, to accept a
setting or Menu button to exit without saving changes.
Setting Up the Rate/Totalizer
Meter (
setup
)
The
Setup
menu is used to select:
1. Input signal the meter will accept and enable
totalizer features
2. Select the display units/tags
3. Select the decimal point position
4. Meter programming & input calibration
5. Display parameter and intensity
6. Relay operation
7. 4-20 mA analog output scaling
Press the Enter button to access any menu or press
Up arrow button to scroll through choices. Press the
Menu button to exit at any time.
