PD6830X Explosion-Proof Modbus Scanners
Instruction Manual
10
ScanView EX Programming
Software
System
Requirements
Windows® 7/8/10 (Windows 32-bit or
64-bit operating systems)
Communications
PDA8068 Meter-to-USB Adapter for
programming,
PDA7485-I RS-232 to RS-485 Isolated
Converter (Cable not included),
PDA8485-I USB to RS-485 Isolated
Converter (Cable not included).
Protocol
Modbus RTU
Scanner Address
1-247
Baud Rate
1200 bps to 115,200 bps
Configuration
Configure one scanner at a time.
File format: Saved as “.mve".
Printing: Configuration can be printed.
Monitor file format: Saved as ".mcf".
Data Logging
Report
Saved as “.csv” file format.
The
Monitor
window is used for monitoring up to 16 process
variables; each is programmed individually to display information
in selected engineering units with custom tags.
The
Display
window is used for programming the upper
display, lower display, dwell times, PV display setup, math
display setup, and tank size indicator.
The
Mode/PV
Setup window is used for selecting master,
slave, or snooper modes and setting up from 1-16 PVs.
The Data Logging window is used to set the computer and
meter time/date, set the on-board data log set time or time
interval method, set PC data log intervals and time units, and
manual control of PC data log with start/stop buttons.
For detailed programming software instructions or to download
ScanView EX software, visit
