PD6600 Series Loop-Powered Process Meters
Instruction Manual
30
Configuring the Display
(
TOp
and
BOTTOM
)
The display is configured using the
TOP
and
BOTTOM
menus in the
DISPLY
menu. Additional
menus are available if the meter is in dual-scale
mode to allow the second PV to be displayed on
either the top or bottom display.
The top display (
TOP
) can display:
•
Process Value (PV)
•
Process Value 2 (dual-scale only; see PV 2
under advanced features menu)
•
Alternating PV and Units
•
Alternating PV and Tag
•
Alternating PV, Units, and Tag
•
Tag
•
Stopwatch
•
Open Collector 1 or 2 Timer
•
Relay 1 or 2 Timer
•
Minimum Value, Maximum Value, or Both
•
Off (Blank)
•
Units
The bottom display (
BOTTOM
) can display:
•
Units
•
Process Value (PV)
•
Process Value 2 (dual-scale only; see PV 2
under advanced features menu)
•
Alternating PV and Units
•
Alternating PV and Tag
•
Alternating Tag and Units
•
Alternating PV, Units, and Tag
•
Tag
•
Stopwatch
•
Open Collector 1 or 2 Timer
•
Relay 1 or 2 Timer
•
Off (Blank)
•
PV’s Percentage of Full Scale
•
The mA Input
•
The mA Output
Programming the Bargraph (
BARGRAPH
)
(PD6604 & PD6608 Only)
The PD6604/8 comes equipped with a bargraph dis-
play for applications where a visual representation of
the process variable’s percentage of full scale is de-
sirable. This feature can be enabled or disabled using
the
Bargraph
menu (
BARGRAPH
). The value displayed
on the bargraph can be the percentage of full scale
(
PV PCT
) or the percentage of a user-programmable
range (
PV
). If the meter is in dual-scale mode, the
bargraph can be assigned to display either PV1 or
PV2 using this menu.
PV+UNIT
DSPLY
TOP
DSPLY
PV
PV+TAG
PV+U+TAG
TAG
TIMR OC1
STPWATCH
TIMR OC2
TIMER R1
TIMER R2
MIN
MIN MAX
MAX
UNITS
OFF
PV
DSPLY
BOTTOM
DSPLY
UNITS
PV+UNIT
PV+TAG
PV+U+TAG
TAG
TIMR OC1
STPWATCH
TIMR OC2
TIMER R1
TIMER R2
OFF
mA IN
PV PCT
mA OUT
PV
UNITS
DSPLY
BARGRAPH
GRAPH
PV
GRAPH
PV PCT
GRAPH
OFF
PV
0 PCT
PV
00,000,00
PV
100 PCT
PV
00,100,00
