Preparation of the Compressor for Work
12
Preparation of the Compressor for Work
Unpacking of the Compressor
Two persons should unpack the compressor.
Stand the box in front of you.
Open the top cover of the box.
Take the compressor carefully by handrails and stand it in front of you.
Put off all the packing material from the compressor.
WARNING
Do not allow children to play with the packaging film. There is a danger of
suffocation.
Do not allow children to play with the package.
Keep the packing material in a place inaccessible for children.
Keep the packing material safe.
Checking State
WARNING
There is a danger of injuries by using a defective compressor.
Check the state of the compressor before every using.
Make certain of the irreproachable state of the compressor.
First of all check elements as follows:
Are the safety valves in good order?
Is the level of oil sufficient?
Is the connection to a power supply in good order
?
Are pressure and cooling lines in good order?
Scratches on the cover of the case are not a fault condition.
Do not connect the defective compressor to a power supply.
Before starting to use the compressor take employers of the company of PREBENA them to repair the
device.
LOOK OUT!
Defective .pressure and cooling lines can break and that can lead to injuries.
Before connecting check if the compressor, pressure and cooling lines have
defects.
