Faults
56
Remove the jammed or deformed fastener.
Attach the cover plate with the cap screws (1) and (2).
Load the magazine as described starting on page 26.
Connect the compressed air supply (see page 23).
Check the function of the tacker (see page 30).
If the fault cannot be corrected, contact your dealer or the
manufacturer (see page
Fehler! Textmarke nicht definiert.
).
Other faults
If a fault has occurred with the tacker that you cannot correct by oiling
and cleaning, then you must inform PREBENA Service.
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
