Maintaining
the tacker
52
Heavy soiling
Wipe down the housing of the tacker with a cloth that has been
slightly dampened with mild soap solution.
Then wipe down the housing with a cloth that has been slightly
dampened with tap water.
Dry it off with a soft, dry cloth.
Oil all metal parts of the tacker with a thin layer of PREBENA
special driver oil.
Oiling the tacker
ATTENTION
Insufficient lubrication, or use of incorrect lubricants, can cause
damage to the tacker.
Use only PREBENA special driver oil.
If there is no oiler installed, and the length of the air line to the
tacker is over 10 m, sufficient lubrication is not guaranteed.
In these two cases, add two to five drops of PREBENA special
driver oil directly into the compressed air connector every day
before starting operation.
ATTENTION
If the oil spills, there is a risk of environmental damage.
Bind the spilled oil with a binding agent.
Wipe up bound oil with rags.
Dispose of the rags in accordance with the applicable legal
regulations at the site.
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
