Tacker
operation 1A-AZ16BNH / 1A-AZ25BNH
40
-
Triggering occurs only when the trigger safety is pressed.
-
One fastener must be driven into the carton material for each
pull of the trigger.
To obtain the desired bent shape, change the operating pressure.
Repeat these steps as needed.
The tacker is now ready for operation.
Single triggering
The unit is set up for single triggering. For repeated driving
operations, it is necessary to actuate the trigger safety and the trigger
lever every time.
WARNING
Accidentally triggering when changing the
trigger setting can cause severe or fatal injury.
Do not point the tacker at yourself, people
or animals.
The device must not be used in the following cases:
For applications that require the tacker to be moved across
scaffolding, stairs, ladders, or ladder-like structures.
For closing crates or boxes.
For applying transport locks.
Set drive depth 1A-AZ16BNH / 1A-AZ25BNH
You can set the drive depth of the fastener into the carton material by
controlling the operating pressure.
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
