AeroSwitch User’s Guide
10
Attaching the AeroSwitch to a Loc-Line Mount
A Velcro® “donut” and disc for attaching the AeroSwitch to a loc-line mount were provided with your switch. The
loc-line mount is
not
included with the switch.
1.
Peel off the paper backing from the ring and press the adhesive side firmly onto the bottom of the AeroSwitch.
2.
Peel off the paper backing from the disc and press the adhesive side firmly onto the switch mount.
3.
Fasten the switch to the mount, making sure it is held firmly in place.
Attaching the AeroSwitch to a
Switch Mounting Kit (SMW-1)
1.
Line up the holes in the plate with the holes on the AeroSwitch.
2.
Insert the screws in the holes and tighten.
Other Mounting options
Switch mounting kits are available from
Finding Additional Information on Using Your AeroSwitch
To view the
AeroSwitch User’s Guide
, videos, FAQs, troubleshooting tips, warranty information, and other
information on using your AeroSwitch, visit
http://www.prc-saltillo.com/aeroswitch
