Pratica Copa Express, Service Manual

Page: 37 / 130

31
Test Mode
In Test Mode, it is possible to define the parameters
of the step, execute it, and if the result of your test
is approved, at the end of the operation, transform
it in Recipe.
To access the Test Mode, click on the Options icon
. In the Options screen, touch the icon .
Define the parameters of Time, Temperature,
percentage of Hot Air, Microwaves and of the
Bottom Heater (infra-red).
Press the icon to start the operation of Test
Mode.
After the conclusion of the operation, the Copy
Parameters icon will be enable: .
Copy Parameters enables the user to transport the
parameters defined is test Mode for the Edition of
Groups and Recipes, that is, when click on the icon
, it will be necessary to inform the user’s access
password to the settings.
After informing the user’s password, choose
between creating a new group or allocating the
transported parameters in a new recipe in an
already existent group.
Define the name of the New Recipe, the Image and
choose in which position (step) you wish to allocate
the transported information.
To finalize, if you wish, define the other steps of the
recipe.