12
6
335V109-IN
PROgRAMMINg
PRetrans 6335 can be configured in the following 3 ways:
1. With PR electronics A/S’ communications interface Loop Link and PReset PC
configuration software.
2. With a HART
®
modem and PReset PC configuration software.
3. With a HART
®
communicator with PR electronics A/S’ DDL driver.
1: Loop Link
For programming please refer to the drawing below and the help functions in
PReset.
When communicating with non-installed modules, connectors 11, 12, 13, 14
(channel 1) and 21, 22, 23, 24 (channel 2) can be dismantled in the safe area
to connect the terminals of the communications interface to the pins.
Loop Link is not approved for communication with modules installed in
hazardous (Ex) area.
Order: Loop Link
P R e t r a n s 6 3 3 5
*
*
4 4
4 3
4 2
4
1
5
1
1
2
1 1 1 2 1 3 1 4
14 (24)
11 (21)
File Product Input O
utput Communicati
on Language Option
08:30:00
PRetop 5331
Date:
2004-8-10
043201594
PRelectronics
Analog input
Analog output
Serial no:
Input type:
Output type:
4 - 20mA
Upscale
Sensor error:
Pt100 DIN/IEC
0.00 - 50.00 C
3-wire
1.00 sec
------
Input range:
Connection:
Cold junction comp:
Response time:
Tag no:
Loop
Link
5909 - USB
5905 - RS232
Disconnect
+Vsupply
* Connected only for
on-line programming
Black
Red
Yellow
Green
Input
Receiving
equipment
Connector
CONTENTS
