PR Lighting PR-2720, Product Manual, Page: 9 / 22

9/22
Electronic SN
Electronic SN=
************
RDM Device Label
RDM Device Label
ANSI E1.20 RDM
Version X.X
Pan Encoder
Wiring Normal
Pan Err 0
Count 50880
Tilt Encoder
Wiring Normal
Tilt Err 0
Count 28080
Driver Faults
X Over Temp 0
Y Over Temp 0
X Fault 0
Y Fault 0
Test Modes
Factory Setup
Factory Setup
OFF
Factory Setup
ON
Self Test
Self Test
OFF
Self Test
ON
Lamp Manual Control
Lamp Status
On Command Sent
S= X C= X
Lamp On
Turn Lamp On
Turn Lamp Off
Wireless Options
Wireless Mode
Wireless Mode
XLR First
Wireless Mode
Wireless Only
Wireless Mode
XLR Only
Wireless Mode
Wireless To XLR
Un-Link Wireless
Really Un-Link
Enter=Yes
ERROR MESSAGES
In the course of launch, Projector examines automatically whether there are errors and if there are, it will display
information as follows:
Sensor Err S1-M1
Colour wheel (1# drive board motor 1) error
Sensor Err S1-M2 CTO (1# drive board motor 2) error
Sensor Err S1-M3 CYM-magenta (1# drive board motor 3) error
Sensor Err S1-M4
CYM-yellow (1# drive board motor 4) error
Sensor Err S1-M5 CYM-cyan (1# drive board motor 5) error
Sensor Err S2-M1 Rotating gobo wheel (2# drive board motor 1) error
Sensor Err S2-M2
Gobo rotation (2# drive board motor 2) error
Sensor Err S2-M3
Effect wheel (2 drive board motor 3) error
Sensor Err S3-M1 Focus (3# drive board motor 1) error
Sensor Err S3-M2 Zoom(3# drive board motor 2) error
Sensor Err S3-M3
Prism (3# drive board motor 3) error