PQ Plus – CMD 68-54/104 V2
Quick-Start Manual
4
EN
Inbetriebnahme
Menu Navigation
Go to next unit. Active energy, active power etc.
More information on selected unit E.g. phase L1, L2, L3, total,
min/ max values
SRVC
Service key, on the right side below the red terminal cover.
Change & save configurations.
Commissioning / Check-up
To check before operation:
•
Phase rotation, Current per phase, Negative energy direction, Sequence
of phase (L1 L2 L3), Current Transformer ratio and Read-out interface:
Correct address
•
Connections D: Lx for Current, N for Neutral
•
Connections CT: S1/2 for Current, Lx for Voltage, N for Neutral
