CIRAS-3 Operation Manual V. 1.09
11
PLC3 and Light unit (if applicable) may need to be returned to PP Systems for a factory update which will
bring your system up to date and allow you to perform future updates locally without having to return the
instruments to our factory. Please contact PP Systems for more information.
Information contained in this operation manual is subject to change without notice. Registered users of
PP Systems products and instruments may obtain updated documentation and software by visiting the
Users Area of our website.
This manual and the information contained within are copyrighted to PP Systems. No part of the
manual may be copied, stored, transmitted or reproduced in any way or by any means including,
but not limited to, photocopying, photography, magnetic or other mechanical or electronic means,
without the prior written consent of PP Systems, Inc.
For applications where failure of this equipment to function correctly would lead to consequential damage,
the equipment must be checked for correct operation and calibration at intervals appropriate to the
circumstances. The PP Systems' equipment warranty is limited to replacement of defective components,
and does not cover injury to persons or property or other consequential damage.
This manual is provided to help you install and operate the equipment. Every effort has been made to
ensure that the information it contains is accurate and complete. PP Systems does not accept any
liability for losses or damages resulting from the use of this information.
It is the operator’s responsibility to review this information prior to installation and operation of the
equipment. Otherwise, damage may be caused which is not covered under our normal warranty policy.
User Registration
It is very important that ALL new users register with us. If you are a PP Systems’ user, please go to
and click on Customer Registration in the upper left hand corner.
Only
REGISTERED
users will be allowed access to the protected “Users” section of our web site. This
section will contain important product information including hardware/software updates, application notes,
newsletters, etc.
Thank you in advance for your cooperation.
