System Setup and Operation
CIRAS-2 Operator's Manual Version 2.04
- 50 -
Cuvette Environment
Click
Cuvette Environment
to enter baseline settings and values of environmental control variables that
define conditions inside the leaf chamber. These settings will be in effect each time you launch the RCS
program under the current
Set
and
Parameters
files, and whenever you exit the Recording Mode, where
you may be using different values. Control values associated with
Cuvette Environment
may be
changed at any time except during Response Curve recording. CIRAS-2 control variables available with
the PLC6(U) automatic cuvette and LED light unit are: CO
2
, H
2
0, PAR, temperature and flow rate.
Additional options exist to control CO
2
, H
2
0 and temperature in ways that allow greater flexibility and
convenience during measurements.
