Powtran JI500 Series, Manual, Page: 123 / 164

Chapter 5 Function parameter
119
Ch
ap
ter 5
second fault order is:
When the output terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
y1.18 Reserved
y1.19
Power-on time of the second
fault Current power-on time of the last fault
●
y1.20
Running time of the second
fault Current running time of the last fault
●
y1.11 to
y1.12
Reserve
y1.23 Frequency of the first fault Frequency of the last fault
●
y1.24 Current of the first fault Current of the last fault
●
y1.25 Bus voltage of the first fault Bus voltage of the last fault
●
y1.26
Input terminal status of the first
fault
Input terminal status of the last fault, the
order is:
BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 DI9 DI0
When the input terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
●
y1.27
Output terminal status of the
first fault
Output terminal status of the last fault, the
order is:
When the output terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
●
y1.28 Reserved
y1.29 Power-on time of the first fault
Current power-on time of the last fault
●
y1.30 Running time of the first fault Current running time of the last fault
●
BIT4 BIT
3 BIT2 BIT
1 BIT0
SPB REL1
Reserve
SPA REL2
BIT4 BIT3 BIT2 BIT1 BIT0
SPB REL1 Reserve SPA REL2