9
Operating Instructions and Replacement Parts List
De
c
kmate 25 Free Fall Pontoon Windlass
Step 4
Installing the switch and wiring the winch
to the battery. (continued).
Installing The Switch On The Winch Cover
1. Locate rocker switch in parts pack and
assemble into switch plate as shown in Figure 16.
Figure 16. Switch Plate Assembly
Rocker Switch
Switch Plate
Rear view of switch.
Make sure angled
terminals are located
as shown.
Top of
Switch Plate
2. Locate push button switch for light and rubber
boot that fi ts over switch and assemble as
shown in Figure 17
.
Switch Boot
Push
Button
Switch
Figure 17. Light Switch Assembly.
Insert push button switch through hole in
switch plate and secure with switch boot.
7. After the wiring has been installed as shown in
Figure 15, place the switch plate assembly into
the
hole cut in the panel and mark the holes for the
switch plate as shown in Figure 16.
Drill pilot holes
with a 1/8” drill bit
.
Mark these
holes and
drill through
with a 1/8”
drill bit
Figure 16. Switch Plate Assembly
8. Secure switch plate to helm using screws
supplied in kit at shown in Figure 17.
Figure 17. Securing switch plate to helm
Secure
switch
plate
using
screws in
kit
