4
2. Installation
There are two types of models in this series:
Model
Type
VFI 10K CPH 3/3
3-phase in/3-phase out 400V online UPS
VFI 10K CPH 3/1
3-phase in/single phase out online UPS
VFI CPH Series can be used as stand-alone rack unit (fits 19” cabinet), it is then connected with terminal input and
output on the back of the unit. It might also be used as parallel system with hot-swappable modularity up to
100kW (10 modules/units). This manual covers but type of installations.
2-1. Unpacking and Inspection
Content of the UPS box:
UPS Manual USB cable RS-232 cable Mounting ears
Slides
Content of the Battery Pack box:
Battery pack Manual Mounting ears
Slides
4 long extensions Parallel busbars
NOTE:
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged during
transportation. Do not turn on the unit and notify the carrier and dealer immediately if there is any damage or
lacking of some parts. Please keep the original package in a safe place for future use.
Battery serial PCB, Brass
spacer, Insulator paper,
Long busbars
(Not apply for the model
with BP 192V
battery pack
)
Fixing nut X 8, M6 screw X 10,
M6 stud X 2, M4 screw X 4,
M3 screw X 2
Parallel cable
and Current
sharing cable
Tower stands
including feet and
short extensions
Fixing nut X 8, M6 screw X 10,
M6 stud X 2, M4 screw X 4,
M3 screw X 2
Parallel busbars
10pcs for 2-2 6K;
12pcs for 3-3 10K;
13pcs for 3-1 10K
