PowerTrunk HTT-500-2 User Manual Download Page 36

Page: 36 / 173

To lock/unlock the keypad:

Press the

(star) key (or a designated soft key), then press the

context

key to lock/unlock the keypad.

Tip:

To quickly lock and unlock the keypad, press and hold (2 seconds)

the

(star) key.

If you press any other key while the keypad is locked no action is taken. The

Navi-knob

remains unlocked when the keypad lock is enabled. A message is

displayed to remind you that the keypad is locked.

Alternatively, you can:

1. Select

Menu > Options > Settings > Keypad Lock

2. Press

Lock

to lock the keypad.

Setting the radio to automatically lock the keypad

You can set the radio to automatically lock the keypad after a period of
inactivity.

1. Select

Menu > Options > Settings > Timed Keypad Lock

2. Press

Toggle

to enable/disable auto keypad lock.

Home screen

The top level screen, known as the

home screen

, appears when the radio

powers

and when it is idle.

Note:

In P25 Mutual Aid mode the Home screen is simplified. See

P25

Mutual Aid mode

(described on page 105)

Tip:

To quickly get back to the home Screen, press and hold (2 seconds)

the

Cancel/Home

key.

The

status line,

at the top of the screen, displays various icons to indicate the

state of operation or when certain functions such as keypad lock have been
activated. It can also be configured to display the Network Name when the
radio is idle.

HTT-500-2 – 12/2016

Summary of Contents for HTT-500-2














































































































































































Search results

Summary of Contents for HTT-500-2

Reviews:

Related manuals for HTT-500-2

Brands by name

Popular brands

PowerTrunk HTT-500-2, User Manual

Search results

Summary of Contents for HTT-500-2

Reviews:

Related manuals for HTT-500-2

Brands by name

Popular brands