92478
www.power-tec.co.uk
Hot Stapler Kit - Rechargeable
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T
+44 (0) 1926 815000
F
+44 (0) 1926 815888
www.toolconnection.co.uk
Guarantee
This item contains consumable elements and are NOT covered by the Tool
Connection Guarantee. For spares contact our service department direct on:
+44 (0) 1926 818186.
www.power-tec.co.uk
92478
Precautions
Always wear heat resistant gloves when using the instrument and making
repairs. Always wear eye protection when cutting staples.
• Once heat is applied, the staple will become extremely hot. (100-200˚C). Keep hands
and body clear of the staple.
• To prolong the life of the cordless hot stapler, after approximately 25 staples have been
inserted let the stapler rest for 10 minutes.
• Do not use with wet hands
• Do not soak instrument with water
• Do not use in wet conditions
• Make sure the tips are cold before leaving on any surface.
• Do not use for any purpose other than that it is intended for.
• Make sure all health and safety procedures are in place before commencing work.
Replacement staples are available from your Power-TEC supplier.
The Tool Connection cannot be held responsible for any damage caused to property
or personnel when using this product.
Part of the Power-TEC range of hot staplers and plastic welders; repairs plastic
components in many areas including car workshop, industrial and home use.
• Charge time approximately 3-4 hours. Complete with charger adaptors for UK and Europe.
• Red low-battery LED will illuminate when battery charging is necessary.
• Supplied with 150 staples (50 each of V-shaped, W-shaped and U-shaped).
• Will accept 0.6 and 0.8mm staples.
