MODEL NO. 71006
INSTRUCTION SHEET
SAFETY LOCKING
ON/OFF SWITCH
QUESTION...
1•847•780•6120
Safety Key
WARNING
Read and understand the instructions before
installing this switch.
NOTE:
This switch features a large ON/OFF paddle with
a removable safety key to disable the switch.
This switch will fit into a 7/8" x 1-5/8" rectangular
hole or mount over a 1-1⁄8" x 2-1/4" rectangular
hole using four #5 screws.
SPECIFICATIONS
Rated Horsepower . . . . . . . . . . . . . . . . . . 2 HP
Rated Voltage . . . . . . . . . . . . . . . . 125 V/250 V
Rated Current Amperage . . . . . . . . . . . . . . 20A
Dimensions . . . . . . . . . . . . . . . . . . . 2" x 3-1/8"
SAFETY INSTRUCTIONS
WARNING
To reduce risk of serious burns, electrocution or
death when installing this switch:
-
This switch is to be used to replace an
existing machine switch with the same
physical configuration, equivalent electrical
specifications and ratings.
-
The installation of this switch MUST be
performed by an electrician or qualified
service personnel in accordance with all
national and local electrical codes.
-
This switch MUST be installed on
an electrical circuit with a verified
machine ground, correct voltage and
adequate fuse protection.
-
Before installing the switch, TURN OFF
AND COMPLETELY DISCONNECT ALL
POWER SOURCES to the machine.
-
DO NOT use this switch in damp or wet
locations. DO NOT use this switch near
explosive fumes or flammable liquids. It is
not sealed or rated for these environments.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
INSTALLATION
WARNING
Connect the switch to stranded
Female Quick-
Disconnect Wire
Terminals
wire with insulated crimp type
wire terminals.
The ON/OFF switch requires
female quick-disconnect wire
terminals with a 1/4" tab.
All crimps MUST be "pull-
checked" to ensure that wires are securely
crimped. If crimps are not secure they may
disconnect and fall out with moderate tension or
when exposed to normal machine vibration.
*
WARNING
-
This switch MUST be installed on
an electrical circuit with a verified
machine ground. In the event of certain
malfunctions or breakdowns the grounding
reduces the risk of electric shock by
providing a path of least resistance for
electric current.
To Install
See the
Wiring Diagram
to properly install
the switch.
OPERATION
NOTE:
Make sure the safety key is
properly inserted.
To turn the switch ON, flip the paddle up.
To turn the switch OFF, flip the paddle down.
NOTE:
When not in use, the ON/OFF switch
should be disabled to prevent unauthorized use.
To disable the switch, turn the switch OFF
and pull the yellow safety key from the switch.
Store the safety key in a secure location away
from children.
