16
OTTOCANALI HGT | SERVICE MANUAL
11. SD Card FW Recovery Procedure
12. USB Pen Drive Formatting Procedure
Switch the unit off, let the capacitors discharge, and
proceed by replacing the factory SD Card with the
Recovery SD Card.
Switch the Amplifier back on, and wait
The amplifier will cycle all the steps involved in the
power up sequence, and it should stop showing the LED
configuration portrayed.
In order to update the Firmware via USB Pen Drive, a FAT32 formatted USB Pen Drive is required.
The USB Pen Drive is now Formatted and ready to accept the FW Update File.
Right click on the Pen Drive, select “Format”
Select FAT32 from the dropdown menù
Click on the indicated box and wait
Summary of Contents for Ottocanali HGT Series
Page 2: ...Intentionally left blank...
Page 23: ...Intentionally left blank...
