PowerShield Centurion PSCE1000, User Manual

Page: 11 / 24

10
3. Operations
3-1. Button operation
Button Function
ON/Mute Button

Turn on the UPS: Press and hold ON/Mute button for at least 2
seconds to turn on the UPS.

Mute the alarm: After the UPS is turned on in battery mode, press
and hold this button for at least 5 seconds to disable or enable the
alarm system. But it
’
s not applied to the situations when warnings or
errors occur.

Up key: Press this button to display previous selection in UPS setting
mode.

Switch to UPS self-test mode: Press ON/Mute buttons for 5 seconds
to enter UPS self-testing while in AC mode, ECO mode, or converter
mode.
OFF/Enter Button

Turn off the UPS: Press and hold this button at least 2 seconds to turn
off the UPS in battery mode. UPS will be in standby mode under
power normal or transfer to Bypass mode if the Bypass enable setting
by pressing this button.

Confirm selection key: Press this button to confirm selection in UPS
setting mode.
Select Button

Switch LCD message: Press this button to change the LCD message
for input voltage, input frequency, battery voltage, output voltage
and output frequency. It will return back to default display when
pausing for 10 seconds.

Setting mode: Press and hold this button for 5 seconds to enter UPS
setting mode when UPS is off.

Down key: Press this button to display next selection in UPS setting
mode.
ON/Mute + Select
Button

Switch to bypass mode: When the main power is normal, press
ON/Mute and Select buttons simultaneously for 5 seconds. Then UPS
will enter to bypass mode. This action will be ineffective when the
input voltage is out of acceptable range.