POWX1197
EN
Copyright © 2022 VARO NV
P a g e
|
3
www.varo.com
HAMMER DRILL 1500W
POWX1197
1 APPLICATION
The machine is intended for hammer drilling in concrete, brick and stone, as well as for light
chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.
It is not designed for commercial use.
Warning! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION(FIG.1)
1.
Dust cap
2.
Fastening sleeve
3.
Auxiliary handle
4.
Grease cap
5.
AVS system (Anti Vibration System)
6.
Mode selector
7.
Handle
8.
Trigger switch
9.
Speed dial
10. Depth stop
11. Depth stop holder
12. Depth stop release button
13. Mode selector lock-off button
14. SDS drill chuck
15. 13mm chuck key
3 PACKAGE CONTENT LIST
▪
Remove all packing materials
▪
Remove remaining packaging and transit supports (if existing)
▪
Check the completeness of the packing content
▪
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
▪
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 x Hammer drill 1500W
1 x Auxiliary handle
1 x Dust cap
1 x Grease tube
4 x SDS drills Ø6, 8-10 & 12 x 150mm
1 x SDS point chisel: 240 mm
1 x SDS flat chisel: 14 x 240 mm
1x SDS drill chuck
1x 13mm chuck key
1x Depth stop
1x Pin wrench
1x Carrying box
1x Manual
When parts are missing or damaged, please contact your dealer.