POWX1196
EN
Copyright © 2020 VARO NV
P a g e
|
7
www.varo.com
7.1
Auxiliary handle
▪
For safety reasons, you should never use this appliance without the auxiliary handle (7)
▪
Move the auxiliary handle (7) by turning it in a clockwise direction
▪
Turn the auxiliary handle (7) to the desired position
▪
Fix the auxiliary handle (7) in the new position by turning it anticlockwise.
7.2
Depth stop
▪
Loosen the wing screw (10)
▪
Insert the depth stop (11) in to auxiliary handle (7)
▪
Ensure that the tooting on the depth stop (11) is facing upwards
▪
Pull the depth stop (11) out until the distance between the tip of the drill and the tip of the
depth stop corresponds with the required drilling depth
▪
Re-tighten the wing screw (10) afterwards
7.3
Inserting/removing the tool
▪
Pull the locking collar (9) backwards and insert the tool in the tool holder (8)
▪
Release the locking collar (9). This lock the holder. Check that tool is properly locked by
pulling it. The tool has radial play because of its design.
▪
Pull the locking collar (9) on the tool backward to removing the tool.
Accessories can be hot after use. Don’t touch the tip of accessory by hand!
Please always use protective floves to remove accessory.
8 OPERATION
8.1
Function selector switch
Don’t press the function selector switch (1) until the appliance has come to
a complete standstill. Switch between functions while the tool is still rotating
can damage the appliance.
▪
Press and hold the release button (2). Turn the function selector switch (1) so that the
required symbol engages at the arrow mark.
Function
Symbol
Drilling
Hammer drilling
Chiselling
Chisel position
adjustment
8.2
Adjusting the chisel position
▪
You can rotate the tool to the required position for chiselling using this function
